Products

Product Categories

PADS Standard Suite 3D

PADS Standard Suite 3D is a cost-effective package with a wide set of features:

  • Fast performance even on big boards
  • 3D viewer with STEP export and import
  • Support for default and net rules
  • Efficient interactive/batch router
  • Exports to IPC-D2581, ODB++, Ascii, STEP, IDF, DXF, intelligent PDF plus other formats
  • Imports for several other CAD formats
  • PADS Logic and PADS Designer front end
read MORE

PADS Standard Plus Suite 3D

PADS Standard Plus Suite 3D has an extensive set of features:

All Standard Suite 3D features:

  • Fast performance even on big boards
  • 3D viewer with STEP export and import
  • Support for default and net rules
  • Efficient interactive/batch router
  • Exports to IPC-D2581, ODB++, Ascii, STEP, IDF, DXF, intelligent PDF plus other formats
  • Imports for several other CAD formats
  • PADS Logic and PADS Designer front end
read MORE

PADS Professional

PADS Professional is the most capable member of the PADS family, suitable for huge designs with complex rule sets. it is based on Xpedition technology and takes the advantage of integrated flow and central library. The basic package contains the Constraints editor, differential pair and high-speed signal support, Variant manager, 3D features, basic Hyperlynx SI and Thermal, and as a new addition PADS AMS (Analog Mixed-signal Simulator).

As it contains also Fab link panel and Drawing editor, the package is extremely cost-effective.

read MORE

Xpedition Enterprise

Xpedition Enterprise is the solution for most challenging designs, relying much on concurrent design. Several designers can work on the same project simultaneously. It also supports Multi-Board Systems design. The autorouting task can be speeded up by sharing the workload on several computers in the network.

read MORE

PADS HyperLynx-options

There are leading edge tools available for PADS Suites at an attractive price level see the links for more comprehensive information.

PADS-ohjelmistoihin on saatavissa edullisesti PADS HyperLynx-simulointiohjelmistoja: PADS HyperLynx DC Drop, PADS HyperLynx DDR, PADS HyperLynx DRC ja PADS FlowTherm XT.

read MORE

HyperLynx

The HyperLynx product family has a complete line of simulation products for PCB design. It has both Pre- and Post-Layout simulation. The GUI is very much like an oscilloscope, making it intuitive to view step response or continuous waveforms. A termination wizard calculates the optimal termination values and strategy. It has a wide library of models, and you can find more IBIS models from the semiconductor vendors web sites.

read MORE

ModelSim

ModelSim has long been the most thrustworthy simulator for FPGA designs. It offers vendor independency and greate performance even with larger designs compared to the budget solutions offered by HW vendors.

The true mixed mode simulation VHDL/Verilog can be performed with PLUS version, allowing the usage of IP blocks written in either one.

read MORE

Questa

Questa is Mentor’s product familiy to offer verification technologies way above traditional ModelSim technology. See Mentor’s pages for more comprehensive information.

read MORE

CAM350

CAM350 is the industry’s de facto standard for verification, optimization and output generation to efficiently drive PCB fabrication.

For PCB designers the importance is the ability to check the data which is sent out from the company and used for the fabrication. This eliminates possible (user or system) errors in the postprocessing. The minimum recommended check is to load the Gerber and Excellon files, as well as the IPC netlist and run the comparison. But the tool can do much more.

read MORE

BluePrint

A typical workflow has been based on PCB design tools as they appeared first in product development. So it was natural to use the tool for all documentation.

During the last decade or two, the environment has changed radically. The computers are used all over the design/manufacturing chain. The workflow for documentation is still the same.

So it is time to think over. A better approach is to split the documentation into primary and secondary documentation. The primary documentation covers the traditional files needed for PCB fabrication, the secondary is for assembly and test. Splitting the documentation means that a change in the assembly documentation does not require a change in the original PCB files – fewer revisions. Documentation is easier to manage.

read MORE

PowerAccess

PowerAccess is a tool to expand PADS native library management and part search capabilities. It maintains a replica of PADS libraries in MsAccess format (.mdb, MsAccess license is not needed), which enables search and browse functions using a table view with multiple attributes and PCB decal preview.

read MORE

DxDBTweaker

DxDBTweaker is a free tool which helps to quickly check and modify the Databook backend access database.

read MORE

Assembly Array Wizard for PADS Layout

If you use PADS Layout to define the assembly array, the Assembly Array Wizard might be useful to you.

You can predefine a variety of arrays with optical alignment markers, pulling holes, break tabs, and edges. The tool reads the board outline from the active Layout session and fits it into an array, showing a preview. The board outline is step&repeated and shown as 2D lines in the design, the actual layout data is not step&repeated (it is left to the fabricator).

read MORE

GET IN TOUCH WITH US!

CONTACT US